Friday, April 17, 2015

Photobook Fun!

I. Love. Pictures.  I also have a bit of an addiction to photo books.  I think they are totally awesome – they look great, and are a fun, creative way to display your pictures.  Rather than my usual step-by-step DIY, this is going to be more of a tip-guide to designing, creating, and ordering a photo book.

Cost: this is pretty dependent on many different factors.  Books can cost anywhere from about $10 - $40, including shipping (they can get even more expensive; but, I’ve never paid more than $30).
Time: again, this is totally dependent on how much time you want to spend on it.  I have created books that taken me weeks of working to finish, and I have created books in a few hours.

What are some photo-book-making websites?
                Three that I have used are: snapfish.com, shutterfly.com, and printstud.io/tinybook.  I use Snapfish and Shutterfly to make traditional photo books (although there are other websites, too!).  And I use Print Studio for a cool, mini, magnetic photo book.

What is this “cool, mini, magnetic photo book?”
                A “cool, mini, magnetic photo book” is so cool because it goes on your fridge.  It’s a tiny photo book that holds 24 photos (one per page).  Each page measures a bit less than 1.7 inch by 1.5 inchThese books come in packs of three, although you can choose to have different pictures in each book.  , The pack of three costs $17, including shipping.  At less than $6 per book, these make great gifts for family members!  Sadly, there aren’t very many customizable options.

The reminder of the information in this article will be about “traditional” photo books

What about a “traditional” photo book?
                A “traditional” photo book is one that’s more of a book – you can include text, change the background, and place word art and other fun icons on the pages.  The pictures in this article are all from my “traditional” photo books.


Each website has it's own page layouts to help you get started.  Or, you can make your own!


What factors determine costs?
                Factors that determine costs vary wildly.
                Size:  There are all sorts of different photo book sizes.  A classic book
                Pages:  Most standard photo books come with 20 pages automatically, with additional pages costing about $1.30 for one page (Shutterfly) and about $2 for two pages (Snapfish).  The price of extra pages varies slightly with the size of your book.
an example of a page with many pictures
                Cover: Hardcover books are more expensive than softcover books (by about $10).  But, in my opinion this cost completely worth it, as I think that hardcover books look much nicer than softcover books.
                Sales:  Both photo book sites offer deals and coupons for their books throughout the year.  I will often make a photo book and then wait for a good deal before I buy it.  Shutterfly often offers 40% off deals.  Snapfish often offers 50% off or three-for-the-price-of-one deal on their photo books.  Occasionally you can get a free photo book offer.  Shipping runs about $8-10, depending on the size of your book.
               

How do you actually make a photo book?
1.       Choose a theme for your book.  Some ideas include vacations, summer break, a semester at Thiel, and a year in review.
2.       Choose photos for your book.  You’ll likely want between three-five pictures per page.  You might also want few pages of one or two pictures and/or a few pages of six or more pictures.  You can make a photo book with 40 pictures, or with 80 pictures.  It’s up to you!
3.       Upload your pictures.  There will be a “My photos” button towards the top on each of the websites.  After clicking that, there will be an option to upload new pictures.
4.       Now, you can begin making your photo book.  You will be able to choose the size photo book that you want to make.  Each website then has a tutorial about how to use the different options on that website.  If you would like some page ideas, Google “photo book ideas,” and then go to pictures.  There will be many different ideas!
You can write stories about the pictures to make your book look more like a book, if you want.

Icons can help your pages look more fun!


Use icons to help theme your pages.
If you are interested in making a photo book, and have never used Shutterfly before, I can send you a coupon for a free 8x8 photo book (It will cost about $8 with shipping; but, that is a really good price.).  If you are interested, send me an e-mail at kcriswell@thiel.edu.  The offer is good until the end of June; so, you will have plenty of time to make a book.


These photo book sites aren't just for photo books.  You can also make cards, photo mugs, and lots of other gifts!  I've posted one of the cards that I have made below.

















Sunday, April 12, 2015

Canvas Photo Transfer

Crafting it Myself: College Student Edition (cost and time-efficient crafts that college students can pick up at their local Walmart) 

If you are anything like me, you LOVE pictures and you’re always looking for fun, new ways to display them.  Recently, I’ve fallen in love with canvas prints.  However, I can’t really afford one (at roughly $36 for an 8x10 canvas print, what college student could?).  So, crafting to the rescue!  This project was cheap, easy, and turned out great!
 
Time: 2 hrs (plus about 24 hrs to dry)

Cost: about $9 for two

Materials (prices from Walmart):
canvas (I got a pack of two 8x10) - $4
foam brush - $1
Modge Podge - $4
a printout of your chosen picture

**note**
I used a Modge Podge type gel.  However, other people have used all sorts of different gels.  It’s really a matter of what is available.

**note**
I would get a pack of two canvases.  That way, if one of your transfers gets messed up somehow, you will have another canvas to try again.

Instructions:
1. Choose your picture.  Do any cropping or editing to your picture before printing it.  A great free website for simple photo editing is www.picmonkey.com.  Also, the computers in the Pedas lab have Photoshop and other photo-editing software.
**note** If your picture has words on it, flip the picture horizontally before you print it (otherwise your words will be backwards!).

2. Print your picture on regular printer paper.  This can be done from any regular printer.  Use basic, printer paper.  Make sure you set up your picture so that it fills the printer page (unless you want a smaller photo transfer).
**note** Make two copies of your picture in case something goes wrong with your first transfer.
**note** If your picture has words on it, flip the picture horizontally before you print it (otherwise your words will be backwards!).




**note** If you want to give your transfer a more “weathered” look, rip the edges of the picture, like above.

3. Prepare your canvas.  Use the foam brush to spread your Modge Podge all over your canvas.  You should make sure the canvas is fully coated with a thick coat of Modge Podge.  If your canvas is not completely covered, your photo will not transfer well.


4. Gently lay your picture, face down, on the canvas.  Start in the middle and work your way outward to press out the wrinkles.  The more wrinkles you have, the more areas where your picture will not transfer completely. 

5. Let your picture dry for at least 24 hrs.  You need to make sure it is completely dry, or else the transfer will not work.

6. After at least 24 hrs, your transfer is ready for you to finish.  This will be tedious work.  But, if you turn on Netflix while you are doing it, I promise it won’t be bad!  Start by dampening the paper on the canvas.  Then, using your finger, rub the paper.  You will notice that it will begin to pull away.  Do this all over the canvas.
**note** A great way to dampen the paper is to wet a paper towel and then brush the paper towel against the paper.
As you begin to rub the damp paper, it will peel off.  Keep peeling!


7. Repeat step 6 again and again until all of the paper has rubbed off.  You will likely need to do this 8 or so times, occasionally taking breaks in between rubbing the paper.  This will allow the paper to dry so that you can see where you need to rub some more.

8. Once the paper has been removed, and you are satisfied with the dried canvas, your picture is ready to be hung.  Enjoy!

Sunday, February 8, 2015

Burlap Wreath

Crafting it Myself: College Student Edition (cost and time-efficient crafts that college students can pick up at their local Walmart) 

Burlap Wreath – Valentine’s Theme (overall cost: $20 - $25)



Materials (all prices given were taken from my local Walmart):
            Burlap: brown ($4)
                         red ($4)
            Wire wreath ($2.50)
            Flowers (I used red and white roses, red flowers, and little white flowers ($5-$15,                                                 depending on how many/what type of flowers you get)
                        *note: a craft store will likely have a much larger selection for your flowers
            A hot glue gun and glue (Walmart: $6-$7 for a gun and a pack of glue)
            Scissors

Optional materials:
            Wooden hearts: $2
            Paint: red, white, pink ($.5 – $1)

Steps:
1.      Attach your burlap to the wreath.  I usually wrap one end of my burlap around a section of the wire, and glue the burlap together.
*note* Alternate between burlap colors as you work.  I like to use more of the tan burlap than the red since the tan is cheaper, and I think it looks just as nice that way.
I just add some hot glue to the end and fold the burlap over the wire to get started.

2.      Take the other end of your burlap and weave the burlap through the wires in the wreath.  I always work from outside to inside, and then turn the wreath and work from inside to outside and so on with the burlap.  You will notice that your wreath is sectioned.  I do one section at a time, and pause to adjust the burlap so that it looks how I want it in each section before moving to the next section.
Weave your burlap through your wire like this.  Work from outside to inside to outside to inside.
Here is the burlap filling one section of the wreath.  Make any adjustments you need before moving onto the next section.
3.      Continue working the burlap around the wreath.  When you reach the end of the wreath, make any last burlap adjustments before attaching the end of the burlap to the wreath.  Again, I use the hot glue.
*note* You may need to cut the burlap before gluing it if you didn’t use your whole role.

4.      Separate your flowers from their stems.  I like to get rid of as much stem as possible before putting my flowers on my wreath.  Grasp the flower with one hand, and the stem with the other hand and pull.  If this doesn’t work, use your scissors to cut the rubber around the wire and then pull the flower off.
*note* Unless you have wire cutters, you may not be able to cut through the wire.  Don’t try too hard to get through the wire, or you will break your scissors.  Gently cut around the rubber stem, not necessarily through the wire, just make sure the rubber is cut all the way around.
5.      Place your flowers on your wreath and arrange them in a way that you like.  *hint* try tucking the flowers among the burlap rather than just laying them on top.
6.      Use the hot glue gun to glue your flowers to your wreath.  Glue in as many places around the flower as possible.

7.      Optional: Paint, arrange, and glue your hearts.  Paint your hearts with colors that you think complement your wreath.  Let your paint dry.  Then, arrange and then glue them on your wreath similarly to how you arranged and glued the flowers.

Monday, April 14, 2014

Fall/Halloween Rice Krispies Treats

Do you need a fun desert for your Halloween or fall-themed party?  How about some cute Rice-Krispie treats?  They’re easy to make and they went over very well at my own Halloween party!  Everyone was very impressed!

Here’s what you need:
            Rice Krispies
            Marshmallows
            Cooking spray
            Green food coloring (for monsters), orange food coloring (or red and yellow) (for pumpkins)
            Chocolate (for monsters)
            A cooking pan (just like when you would make regular Rice Krispies Treats)
            Green icing (I used one of those little tubes that you can just squirt out a little string.  You                                     won’t need much.)

Here’s what you do:
            1: Follow the directions on the Rice Krispies box to whip up some Rice-Krispies-treat mix.
            For Monsters:
                        2: Reduce heat to low, and squirt in some green food coloring.  Start with only a                                       few drops.  You can add more as needed.
                        3: Stir until all the mix is green (feel free to add more drops if you do not have the                                     color you desire or the green is not completely mixed in).
                        4: Spray cooking spray on your hands and in a pan (if you neglect to coat your                                                         hands, the Rice Krispies will stick and you won’t be able to mold                                                                anything)
                        5: Put green Rice-Krispies-treats mixture into the pan and flatten using your                                                               fingers.  (If you don’t have a pan, just make a rectangle out of the                                                                  mixture.) Let cool.
                        6: Once cool, cut into rectangles.
                        7: Melt your chocolate (place chocolate in a microwavable bowl and microwave                                                      on high for 10 seconds.  Take it out and stir.  After that, microwave in                                                          5-second increments (stirring in between each increment) until the                                                                  chocolate is melted.
                        8: Dip one end of the green Rice-Krispies-Treat rectangle into the chocolate.
                        9: Place on wax paper to cool, and enjoy!
            For Pumpkins:
                        2: Reduce heat to low, and squirt in some orange food coloring (or red and                                                               yellow).  Start with only a few drops.  You can add more as needed.
                        3: Stir until all the mix is orange (feel free to add more drops if you do not have                                                         the color you desire or the orange is not completely mixed in).
                        4: Spread out some wax paper and spray cooking spray on your hands (if you                                                           neglect to coat your hands, the Rice Krispies will stick and you won’t                                                           be able to mold anything)
                        5: Form little balls of orange Rice Krispies Treats.  Place each ball on the wax      
                                     paper.  Save some Rice-Krispies-Treat mix for use as stems.
                        6: Push your thumb into the top of the soon-to-be-pumpkins to make a small
                                    indentation.
                        7: When you only have a little bit of Rice-Krispies-Treat mix left (enough for
                                    a little stem for each of your pumpkins) add a drop or two of green
                                    food coloring to make what is in your pot brown.
                        8: Form little stems (in the shape of a cylinder) and press them into the
                                    indentations in each of your pumpkins.
                        9: Now, take your green icing and squirt it onto your pumpkins near the stem. 
                                    Feel free to make a little swirly design.

Let cool and enjoy!
(If you aren’t going to enjoy them right away, make sure you remember to wrap them in plastic wrap so that they stay fresh!)
           


                       

Thursday, January 2, 2014

Luggage Tags for the Traveler in Us All



These luggage tags are great if you want to make a quick and easy gift for someone who loves to travel or if you want to make a quick and easy gift for yourself to spice up your luggage!  It’s also a pretty good way to use up some of the slightly larger scraps that you have.

The tags end up being 3x4 inches large with a 2x3 inch pocket and an 8-inch long strap.  You can adjust the sizes as you desire.

Materials:
            Fabric (patterned if you choose)(You will need two 4x5-inch rectangle for each tag)
            Fabric (a solid color that matches the pattern)(You will need one rectangle that is 2x16 inches.  This is for the strap part.)
            Clear Vinyl (I used 12 gauge.  I wouldn’t recommend using anything thinner than that.) (You will need one 2.5x3.14-inch rectangle for each tag.)
            Iron-on interfacing (You will need two 3x4-inch rectangles for each tag)
            An iron
            Thread that matches your fabric

Instructions:
            1: Cut all the pieces that you will need from your fabric selection.
·         Two 4x5-inch pieces of your patterned fabric
·         Two 3x4-inch pieces of the iron-on interfacing
·         One strip of 2x16 inch solid fabric
·         One piece of vinyl, a 3x4-inch rectangle
            2: Following the directions on your iron-on interfacing, adhere one piece to the back of each of your pieces of patterned fabric.  Attach the interfacing to the center.  There should be about ½ inch of fabric on each side.
            3: Fold the edges of the fabric along the edges of the interfacing so that the fabric edges face the center of the fabric.  Iron the creases to make them hold.  Do this for both of the pieces of patterned fabric.

            4: Place the two pieces together so that the edges match.  Sew them together.  (I used a zig-zag stich because I like the way it looks, but feel free to use whatever stitch you want.)  Make sure you leave space for the strap (see HINT below).
                        **HINT**: Start the sewing at the top, a little to the right of the middle.  Go around the edge of the tag and stop the sewing at the top, a little to the left of the middle.  You need to leave about ¾ of an inch open at the center of the top of the tag so that you can insert the strap.
If the larger square is your tag, sew where the dotted lines are located.  Be sure to leave a hole at the top.
            5: Take the strip of solid-colored fabric and fold it in half.  Iron the crease and open the strip.  Take one edge of the strip and fold it again so that the edge touches the center crease.  Do this to the other side as well.  (**HINT**: I ironed each of these creases as well; but, be careful not to iron out the center crease.)  Fold the strip in half again and iron together.  You should have a strip that is about ½ inch wide and has the edges tucked under towards the center.
Fold along the dotted lines.  When you are finished, you should have a strip of fabric that is 1/2 inch thick.

            6: Sew the strap together.  Again, I used a zig-zag stitch. 
            7: Fold the strap in half and insert the ends into the hole at the top of the tag.  Sew the hole together so that the strap is now attached to the tag.
Insert the strap and sew along the red dotted line.  Make sure you sew both ends of the strap into the hole.

            8: Place the vinyl on top of the tag.  Center it as best as possible (**HINT**: It should be a little closer to the bottom than the top.  To tell how close, center the vinyl left and right and then position the bottom edge so that it is equal in distance to the bottom as it is to the left and right sides.)
            9: Sew the vinyl to the tag.  This time, I used a line stitch that was 3/8 of an inch from the outside edge of the tag.  Make sure you are not stitching right on the edge of the vinyl.  Make sure you leave the top open so that you can insert a paper with your information.

            **HINT**: Start at the top of the right side and stitch to the top of the left side.
This time, the blue square is the edge of the vinyl and the red dotted line is where you should sew.  Make sure you leave a hole at the top.
            10: Your luggage tag is ready for use!!

           

            

Wednesday, January 1, 2014

Pillowcase

Have you ever seen fabric that made you think, 'Boy, I just want to sleep on that!'?  Well, here's your solution!
Materials:
            1 yard of a patterned (or solid, if you desire) fabric
            5 inches of a solid-colored fabric that goes with your patterned fabric

**This pattern is for a traditional-sized pillow.**

Instructions:
            1: Trim the edges of your fabric so that you have square corners and get rid of uneven edges.  A good way to do this is to fold the fabric in half, matching up the two selvage edges of the fabric.  Flatten the fabric.  You may need to fold the fabric again.  In this case, line the folded edge with the selvage edges.  Then, cut the non-selvage edges so that they form a 90-degree angle with the selvage edges.
            2: Cut the patterned fabric to be 30-inces wide.
            3: Cut the solid fabric to be 30-inches wide and 4-inches thick.  This will end up adding about 3 inches of solid-colored fabric to your pillowcase.
            4: Sew the solid-colored fabric to the top of the patterned fabric.  You are sewing the 30-inch edges together.
            HINT: Before you sew the pieces together, be sure to pin them together.  This will keep them from moving when you start sewing. 
            HINT: This is how I like to sew my edges so that they don’t fray:
                        4.1: Put the fabric backs together and pin at the edge you will be sewing.  The front of each fabric should be facing out.
Here, the good edges of the fabric are showing.  I begin by sewing along the pinned edge of this.
                        4.2: Sew together using a small seam allowance, no larger than ¼ of an inch is needed.  I usually use one slightly smaller, and use the edge of the sewing-machine foot as my guide.
                        4.3: Flip the fabric so that the fabric backs are showing.  You can iron the seam if you want.  Pin the fabric again.
                        4.4: Sew together using a larger seam allowance.  When you unfold the fabric, the seam will be along the wrong side of the fabric, and the fabric edges will be tucked into the seam so that it won’t fray.
Here, you can see that the wrong edge of the fabric is showing.  I sew along this edge next to create my finished seam.
            5: Fold the fabric in half lengthwise.  Line up the bottom edge and the side edge.  Pin and sew together.  Again, see the above hint about sewing edges together.  Make sure that you don’t sew the top together.
            6: Finish the top edge of the fabric.  To finish edges, I fold the edge once and then fold it under itself once more, pin, and sew.



           


 7: Place pillowcase on pillow and enjoy!




Tuesday, November 26, 2013

Pokemon Birthday Party


Hello, all.  Do you have a special someone in your life who is about to have a birthday?  Do you want to give him or her a fun party, no matter what his or her age is?  Does this person love Pokémon?  Well, then do I have some ideas for you!

I would like to begin by stating that my boyfriend and I are both college students.  But, that won’t stop us from having some good, old fashioned fun.  We both love Pokémon, I love planning fun parties, and he had a birthday coming up!  So, everything was lined up perfectly to throw him a Pokémon-themed birthday party… well, almost everything.  Did I mention that we are both college students?  An 8-pack of Pokémon plates online costs about $5.  We had 15 people at the party.  So, that means two sets of plates: $10.  Add in cups, napkins, party hats, and decorations, and I would have spent over $30, probably even over $40.  So, I did the next best thing: I searched the internet for alternatives.  However, I quickly discovered that the internet is not loaded with Pokémon-party ideas.  So, I’ve compiled a list of some of my favorites as well as how to implement them!

The picture qualities aren't the best, but you will hopefully get the idea
Pokémon Cups and Party Hats:

            Materials:
o   plain or colored cups
o   party hats
o   access to a computer with Paint or a similar program
o   access to a color printer
o   glue and scissors          
            Directions:
            1)  If you wish to make your own Pokémon circles, please do so!  Perhaps the subject of
                           the party likes different Pokémon than my boyfriend and I.  Or, if you like, you
                           may certainly use mine!  If you choose to make your own, however, here’s some
                           steps:
                        1.1) Draw circles on Paint or your editing program.  Make these circles large with a                                                        thin line.  If you want perfect circles, press the Shift button while you
                                           click and drag.  I found that a 4x3 matrix of circles on one page
                                           makes for good-sized Pokémon.
                        1.2) Draw a slightly smaller, and more bold (thicker line) circle inside your larger                                        circles.
                                    Hint: If you want to save some time, only make one set of circles and then                                        copy and paste the rest!
                        1.3) Find pictures of Pokémon from online and save them to your computer. 
                                    Hint: For those of you who know nothing about Pokémon, it helps to find                                     out the names of some and then type the names into Google.  If you just                                                type “Pokemon” you’re going to have a more difficult time finding ones                                                that you can use!
                        1.4) Beginning with only one picture, paste it onto Paint.  Resize it so that it fits                                             inside the circle.  You may need to redraw one or both of the circles depending on                                       the size of the box around the Pokémon.  However, it is not too difficult to line                                               the circles up.
            2) Print your pages.
            3) Cut them out.
            4) Glue them onto the cups and hats.
            Walla!  You have some cheap cups and party hats!

Pokémon Decorations
Several of my friends helped me decorate.
            Materials:
o   access to a computer with Paint or a similar program
o   access to a color printer
o   scissors
o   tape
            Optional Materials:
o   glue
o   tablecloth (plastic and cheap if you’re trying to save money)
o   construction paper, red, white, and black (for “Happy Birthday” sign)
o   cardboard (for Pokémon stand ups)
o   twirly ceiling decorations (or paper plates to make them)
o   string (for twirly ceiling decorations and “Happy Birthday” sign)
o   ribbons (I went with a red, white, and black theme.  It just seemed to fit.)

            Directions for twirly ceiling decorations:

            1) Find some pictures of Pokémon and save them to your computer.
                        1.1) Draw circles on Paint or your editing program.  Make these circles large with a thin                                      line.  If you want perfect circles, press the Shift button while you click and                                drag.  I found that a 4x3 matrix of circles on one page makes for good-sized                                               Pokémon.
                        1.2) Draw a slightly smaller, and more bold (thicker line) circle inside your larger                                                   circles.
                                    Hint: If you want to save some time, only make one set of circles and then                                     copy and paste the rest!
                        1.3) Find pictures of Pokémon from online and save them to your computer. 
                                    Hint: For those of you who know nothing about Pokémon, it helps to find                                      out the names of some and then type the names into Google.  If you just                                       type “Pokemon” you’re going to have a more difficult time finding ones                                      that you can use!
                        1.4) Beginning with only one picture, paste it onto Paint.  Resize it so that it fits                                                      inside the circle.  You may need to redraw one or both of the circles depending on                                      the size of the box around the Pokémon.  However, it is not too difficult to line                                             the circles up.
            2) Print your pages.
            3) Cut them out.
            4) If you do not have store-bought twirly ceiling decorations, make your own with plastic plates!
                        4.1) Using the scissors, cut a spiral in the paper plates.
                        4.2) Cut a small hole near the end of the outermost section.
                        4.3) Tie string in the hole.
            5) Glue a Pokémon circle onto the centermost end of a twirly ceiling decoration.
                        Hint: If you are using colored paper plates, make sure the colored side will hang                             so that it is facing the ground.  This way, no one will know that only one side is                             colored.
            6) Let dry, and then hang!

            Directions for “Happy Birthday” Sign:

You can see the "Happy Birthday" sign in this picture.
            1) Find something round that is good for tracing and is a good size for a pokéball for one of the                          letters.  I used a roll of duct tape.
            2) Trace 14 of these on red construction paper.

            3) Trace 7 of these on white construction paper.
            4) Find something round that is good for tracing that also has a larger circumference than the                              pokéball. 
                        Hint:  I used something that had almost twice the circumference.
            5) Line up your larger object so that it runs through both of the center edges of the white circles.                        Now, turn the circle so that you trace another line that is a mirror of the first line.
                        Hint: It should look like an eye when you finish.

            6) Take your larger tracing object and place it on the black construction paper.  Trace a      line that                  is longer than your already-traced circles.  Move the tracing object and trace a   second line                          so that there is a small space in between the two lines.  Do this so that you  have 14 curved bars.
                        Hint: They should be about a centimeter wide.
            7) Take a quarter and trace 14 circles on the black construction paper.
            8) Using a dime or nickel, trace 14 circles on the white construction paper.
            9) Cut out everything.
            10) Glue everything together to make pokéballs.  You may need to trim your curved, black, bars.
            11) Writing one letter on each ball, spell out the words “HAPPY BIRTHDAY.”
            12) Tape each of the pokéballs to the string.
            13) Hang from the celing!

            Directions for Pokémon stand ups

            1) Print out pictures of Pokémon.  Have each take up an entire sheet of paper.
            2) Cut out the Pokémon.
            3) Glue the Pokémon to the cardboard.
                        Hint: I used empty cereal boxes.
                        Hint: If you use a box, glue the Pokémon so that the bottom of the figure is at the                             edge of the box, that way there is a piece that folds easily.
            4) Cut the Pokémon figure out of the cardboard.
                        Hint: don’t completely cut out the bottom.  Leave about two inches so that you                                 have something to fold over.
            5) Cut out a strip of cardboard that is about two inches thick.
            6) Tape this strip onto the back of the cutout and onto the part that foldes over.  This will             keep the cutout standing.

            Decorating the room:


















            Table:  I just laid a cheap, plastic tablecloth across the table.  Then, I set the cups and hats                         on the table so that people could choose theirs as they entered the apartment.
            Wall:  I taped some cut-out Pokémon on various parts of the wall.
            Ceiling:  I hung my twirly cut outs, “Happy Birthday” sign, and ribbon from the celing.

How about that cake?
            Well, I will be honest; my cake was very time consuming.  It took me over 5 hours to decorate the cake and cupcakes, but I was extremely pleased with the results.  I will tell you how I did what I did; but, there are probably other cake options if you aren’t as into cakes as I am. 

            Materials:
o   a small, plastic Pokémon (about 2 inches tall, can be purchased from Amazon (I used a Lucario, my boyfriend’s favorite.))
o   a spherical cake pan (If you don’t have one, go ahead and purchase one.  I love mine, and they can be used for so many fun cakes.  Plus, they just look awesome!)
o   icing bags and star tips (if you’ve never used them before, it’s really not difficult. I’m sure you could find a tutorial online)
o   various colors of food coloring (black and red are a necessity; but I used other colors such as yellow, blue, purple, and pink)
            Directions:
                        1) Bake your cake following the directions.
                                    Hint: To make a thicker cake and avoid your cake “sinking” once it is all                                        together, use less oil… substantially less oil.  Like, one tablespoon and                                             only one tablespoon.
                        2) I made cupcakes with the leftover cake batter.
                        3) Put your cake together, and put the crumb coat on.
                                    Hint: A crumb coat is a layer of icing that catches all the crumbs so that                                          you don’t get any crumbs into your top-layer icing.
                                    Hint: Don’t forget to cut out a spot in your cake to stick the Pokémon.  Put                                      him in the cake before you put it together.
You can see the Pokemon sticking his head out from the center of the cake.
                        4) Stick in the fridge and let the crumb coat harden overnight (no need to cover).
                        5) Take a toothpick and draw the designs you want to use into the crumb coat on                                               your cake/cupcakes (another handy reason to use a crumb coat).  For the main                                cake, I made a traditional pokéball; but, for the cupcakes, I did a variety of                                    pokéballs.
                        6) Mix your icings (this takes place right before you use them).

                        7) Using the icing bags and star tips, decorate your cake.  I began with the black                                               circle in the main cake and all the cupcakes (for this part, I actually used a plain                             tip, not the star tip, but a star tip would look nice, too)
                        8) After much toil, you will have a pretty awesome cake.  Remember to put                                                        toothpicks in your cake before putting any ceranwrap around it so that you don’t                           ruin all your hard work.


Games:

            Seeing as I was throwing a party for a bunch of college students, I didn’t want to overload them with              games.  However, I couldn’t resist just one… Pin the Tail on the     Pikachu!
            Materials:
o   access to a computer with Paint or a similar program
o   access to a color printer
o   scissors and tape
            Directions:
                        1) Find a high-resolution picture of Pikachu.  Copy and paste him into Paint, and                           then make him LARGE.  I made him to cover 6 sheets of paper – a section that                                     was 3x2 pieces of paper large.  Save your work.
                                    Hint: Remember to delete his tail before printing.
                        2) Save the Pikachu to a second file without his tail and print.
                        3) Go back to your original file and delete all the Pikachu except his tail.  Print                                                   enough tails for everyone at the party.  If you want to save some paper, you can                             make the tails a bit small so that you are able to fit two or three to each page.
                        4) Cut out the tails, and put a small rolled piece of tape on the back of each.
                        5) Tape the papers to the wall. (the full papers, not the tails)

                        You’re ready to play!